Gantry Submerged Arc Welding Equipment For H Beam Production Line

Gantry Submerged Arc Welding Equipment For H Beam Production Line

1. Technical Parameters

● Height of the wing board: 200-800 mm
● Thickness of the wing board: 6-40 mm
● Height of the former: 200-1500 mm
● Thickness of the former: 6-32 mm
● Length of the usable work piece: 4000-15000 mm
● Welding speed: 240-1500 mm/min
● To-and-fro stoke of the welding arm: 800mm
● Welding position: fillet welding in the flat position
● Size of the usable welding wire: 3.2-5 mm
● Flux recovery capacity: 100 kg * 2

2. Performance

        MZG1000*2 Gantry welding machine is specially designed for the welding of H beam. It realized the combination of welding control and trolley control and can be operated easily. Driven by alternating current converter, stable speed, digital display of the linearity speed, good reliability, floating type tracing to guarantee that the welding torch targeting at the welding seam accurately. The power line for the submerged arc welding can move on the portal frame to shorten the length of the control cable and the welding cable as far as possible to quicken the response, reduce the pressure and stabilize the welding current.

3.Compose parts

● Mail frame: gantry, travel unit, carriage wire-feeding tube and attachments etc.
● Welding arm and its carriage: 2 sets of welding arm elevating unit arm travel unit, carriage and its attachments
● Flux recovery system: 100kg flux recovery unit flux separating barrel flux hopper flux recovery and convey tube.
● Welding system: 2 sets of MZG1000 welding machine.
● Welding control board and welding gun.
● Spare parts: 3 piece of 5A fuse, bottoms*2, 2 pieces of 10A fuse, 8 pieces of wire guide.

4. Technical files

● Using manual (Include electrical schematic).
● Shipping list.
● Certification of the machine.
● Drawing of the machine.
● Hydraulic using manual, inverter using manual, submerged arc welding using manual.

Main framework of gantry welding machine which is suitable for a 1500mm h beam, we also could design for 1800mm or 2000mm H beam   We choose 2 sets  Zhengzhong MZ1000 series submerged arc welder, Lincoln welder is a option for you