-
H Beam Production Line
-
H Beam Welding Line
-
Pipe Welding Rotator
-
Welding Manipulator
-
Welding Positioner
-
CNC Plasma Cutting Machine
-
CNC Drilling Machine
-
Hydraulic Shearing Machine
-
Hydraulic Press Brake
-
Fire Resistant File Cabinet
-
Industrial Safety Cabinets
-
Wind Tower Production Line
-
Box Beam Production Line
-
Shot Blasting Machine
-
Orbital Tube Welding Machine
-
C Z Purlin Roll Forming Machine
-
PU Sandwich Panel Production Line
-
Steel Silo Forming Machine
-
Abdulalet me offer my most sincere congratulations upon Friendship Machinery's success
Weld Multi Function H Beam Production Line Vertical Assembling Welding And Straightening
Web Size | 300-1500mm | Web Thickness | 3-12mm |
---|---|---|---|
Flange Size | 150-500mm | Flange Thickness | 5-20mm |
SAW Welder | USA Lincoln DC1000 | MIG Welder | Provide By Buyer |
High Light | multi function h beam production line,vertical assembling h beam production line,welding straightening h beam assembly machine |
H Beam Assembly Machine Beam Machine Weld Beam Production Line
H-beam vertical assembling, welding and straightening multi-function integrated machine is a high-efficiency equipment for the production of welded H-beams. It can simultaneously complete H-beam assembly, submerged arc welding, and flange plate welding deformation on the same machine.The machine occupies a small area which can save installation space. It saves the hoisting and turning time between each process with single machine,then the efficiency is greatly improved, and the cost is reduced. It is a high-tech, economical and practical H-beam production equipment.
1. Technical information
● Web height: 300-1500mm
● Web thickness: 3-12mm
● Flange width: 150-500mm
● Flange thickness: 5-20mm
● Welding speed: 0.3-1.9m/min
● Beam length: 4000-15000mm
● Maximum beam weight: 4000kg
● Cross section drift angle: ≤8°
2. H beam production line/ End assembling machine - introduction
End assembling machine will assemble on-specification plates into H shape, and spot welding, forming at the end. Ends assembling machine is made up of main machine, roller conveyor, hydraulic system and electric control system.
Main machine consists of web elevation mechanism, ends alignment device and conveying transmission mechanism. All the movements use hydraulic system driving.
Roller conveyor is driven by motor reducing gear to rotate, then drive the work-piece into the host machine. There are hydraulic overturning mechanisms on both sides of roller which can turn up and adsorb the flange plates on both sides of the roller onto magnetic guide wheel, so that it can make the both side of the standing flange plate form H shape with the center flatwised web plate.
3. H beam production line/ Horizontal welding machine - introduction
Preceding welding machine focus the technology in mechanical, electric, hydraulic and pneumatic. First spot the end of H-beam, through single arc double wires submerged arc welding to form it H-beam.